|
|
Post by Maverick on Sept 7, 2009 0:05:34 GMT 10
very nice all and Quentin you should make them standalone  that makes them heaps better  |
|
|
|
Post by Jaiden on Sept 7, 2009 17:50:32 GMT 10
I'll help you through it mate.. Looks great so far.
|
|
Quentin
Junior Driver
??????????? ?$ ?[Mo0:32]
Posts: 251
|
Post by Quentin on Sept 7, 2009 20:47:36 GMT 10
ok got abit more done. Credits - still just Mitch Blake for the chassis and running gear, and myself for the tipper bits   i think im getting close to finishing the modelling. im sure there are things that need fixing that yous will point out |
|
|
|
Post by Jaiden on Sept 7, 2009 21:23:15 GMT 10
Fix ur normals..
Surface/ normals/calculate
If that doesnt fix them, In polygon mode select the curved side of the tipper and then detach polies and re-calculate normals.
|
|
Quentin
Junior Driver
??????????? ?$ ?[Mo0:32]
Posts: 251
|
Post by Quentin on Sept 7, 2009 21:54:29 GMT 10
ok, that made the shaddows go away heaps, is that what its supposed to do?
|
|
|
|
Post by Jaiden on Sept 7, 2009 21:59:29 GMT 10
Yes, Post a pic so i can see
|
|
Quentin
Junior Driver
??????????? ?$ ?[Mo0:32]
Posts: 251
|
Post by Quentin on Sept 7, 2009 22:08:38 GMT 10
 i havnt assigned any materials yet, but i read that trailers usually only have one material. should i start a thread in the help me, might be handy for anyone else doing it for the 1st time |
|
|
|
Post by Jaiden on Sept 7, 2009 22:13:03 GMT 10
Well mate that looks perfect.
To get it ingame.. Chose an already modded trailer.. Export your trailer to replace the trailer. Make sure the boxes read/write Mat, Tobj, PMC, PMD are NOT Ticked.. If you tick them you will have problems.
Then make it an SCS (i'm sure you know how to do it) and then test it
Then download yourself a copy of Hex editor Neo (absolutelly free) You use it to make trailers standalone.
Then when you get up to this stage Pm me or ask me on xfire or something for me to send you the vid of making things standalone..
[glow=red,2,300]Ohh and no need to assign materials.[/glow]
|
|
|
|
Post by Hauler on Sept 7, 2009 22:17:55 GMT 10
Great job Quenten i'll be looking foreword to haulin those  |
|
|
|
Post by Digit on Sept 7, 2009 22:28:03 GMT 10
Nice work quentin. I think you need to look at getting some covers for the back lights though
|
|
tysonshane
Junior Driver
????#??? ???? ?[Mo0:0]
Posts: 255
|
Post by tysonshane on Sept 7, 2009 23:42:33 GMT 10
well mate that is lookin sweet,i like it,that tipper and my tipper with jaidens bins will make a nice bulk haulage section for AF,heres what i have been doing tonite,with the advice and help from MAV making them standalone i hav done this made the wings shorter added the rubber strips on the side raised the cab about 4 inches and closed the gap under the back of the cab so u arent staring out the front   |
|
|
|
Post by GermanKenworth on Sept 7, 2009 23:50:05 GMT 10
damit nice job ... time for a new company pack  |
|
|
|
Post by Maverick on Sept 8, 2009 8:35:26 GMT 10
^^Lmao^^ and i just jeezed in my pants *I am in love with that argosy*  |
|
Matt
Senior Driver
[Mo0:0]
Posts: 332
|
Post by Matt on Sept 9, 2009 11:56:52 GMT 10
Update on my 604... Creds still the same: Rowan: Engine Jaiden: Help, KW badge, door, air cleaner/exhaust pipes connector Me: The rest (bonnet, cab, roof, chassis, etc)  |
|
|
|
Post by ashley18 on Sept 9, 2009 12:13:20 GMT 10
looks great matt, is it gonna be a flat top or raised roof?
|
|
that makes them heaps better 
